|
LOKRING
Announcements
|
|
1. The
2” NPS Stainless Steel (SS40) Sch 10/40/80 Rated Fitting
|
|
LOKRING’s
new 2” NPS stainless steel fittings can now be used with
Sch 10, 40, and 80 pipe. (Previously the 2” stainless steel
fittings were only rated for Sch 10 and 40).
Complete
Information at Technical Bulletin
(PDF Format)
|
|
| 2.
A Single Swivel Connection for Lokring’s IT100 Tool (For 3”
NPS) |
 |
The
new single swivel connection style for the Lokring IT100 tool*
makes installing fittings even easier. Instead of three hoses
from the hydraulic pump through a “Y type” splitter
fitting to the tool head, now all that is needed is one hose,
which connects directly from the pump to the the hydraulic tool.
Complete
Information at Technical Bulletin
(PDF Format)
|
|
|
3. The
Swivel Connector for LOKRING Tools
|
|
LOKRING’s
new option for connecting a hydraulic hose to a LOKTOOL is a swivel
that enables the hose to move freely in 2 axes at the connection
to the tool.
Complete
Information at Technical Bulletin
(PDF Format)
|
|
|
4.
Portable LOKTOOL® with Swivel
|
|
The
Portable LOKTOOL™ with manual hand pump allows for 360 degree
positioning of LOKTOOL™ head.
The
Positional Locking feature uses a moveable indexing pin to establish
fixed positions of 0, 45, and 90 degrees.
Complete
Information at Technical Bulletin
(PDF Format)
|
|
|
5. LOKRING
High Point Vent
|
|
Designed
to allow venting of a system during filling, and then secure closure
after venting is finished LOKRING High Point Vent fittings come
in 1/4” thru 2” NPS sizes with Lokring ends.
Complete
Information at Technical Bulletin
(PDF Format)
|
|
|
6. LOKRING
Steam Trap Adapter
|
|
7. LOKRING
Type K Copper Fittings
|
