MAS-3000 Carbon Steel Pipe Fittings

The following page has specific information for the MAS-3000 Carbon Steel Fittings.  General tooling information and information about typical shapes can be found on the tooling reference page. You can also find details about the MAS3000 Envelope Dimensions and Space requirements.


Pipe
NPS 
MAS-3000 Series (1/2)
Carbon steel fitting
Tool Kits (3)
Tool Kit (4) Part Number
1/4″
MAS-3000-XXX-P04
ITK20-MAS/SS4-P04
9080101
3/8″
MAS-3000-XXX-P06
1/2″
MAS-3000-XXX-P08
MTK45-SS4/MAS P08/P12/P16-FR
9080177
3/4″
MAS-3000-XXX-P12
MTK45-SS4/MAS P08/P12/P16-FR
9080177
1″
MAS-3000-XXX-P16
MTK45-SS4/MAS P08/P12/P16-FR
9080177
1″
MAS-3000-XXX-P16
MTK60-MAS/SS4-P16/P24/P32-FR 9080135
1-1/4″
MAS-3000-XXX-P20
MTK-MAS/SS4-P20/P24/P32
9080225
1-1/2″
MAS-3000-XXX-P24
MTK60-MAS/SS4-P16/P24/P32-FR
9080135
2″
MAS-3000-XXX-P32
MTK60-MAS/SS4-P16/P24/P32-FR
9080135
3″
MAS-3000-XXX-P48
ITK-100-MAS/SS4-P48
9080196

1. XXX denotes fittings configuration (i.e. CPL = Coupling). See Chart in left column for Typical Shapes.

2. Carbon Steel tools and inserts can be used with Stainless Steel fittings – consult your authorized LOKRING distributor for details and options.
3. In addition to the ITK & MTK Tool Kits, a hydraulic pump and hose are required.
See Figure 3 at left which shows the electric, pneumatic, and manually operated pump options and the 15′ hose.

4. Where Tool Kit Part Number is not indicated, contact your authorized LOKRING distributor for details. Additional individual and multiple Tool Kits are available.

 

How to select tooling

  • The shaded cells show which size tool can install which size fitting.
  • Specify the fitting size and material along with which tool size is desired in order to receive the proper setup for installing Lokring fittings.

Tool Selection for Carbon and Stainless Pipe Fitting Sizes

Tool

1/4

3/8

1/2

3/4

1

1-1/4

1-1/2

2

3

IT20
IT30
IT45
IT50
IT60

IT100