The following page has specific information for the Railroad Micro Alloy Carbong Steel fittings. General tooling information and information about typical shapes can be found on the tooling reference page.
|
Pipe Size
|
Fitting P/N
|
Multiple Tool Kits
|
Tool Kit
Part Number |
|
3/8″ NPS
|
CS-3000-XXX-RR-P06
|
MTK50-RR-P06/P08/P12/P16/P20.
|
9080198
|
|
1/2″ NPS
|
CS-3000-XXX-RR-P08
|
||
|
3/4″ NPS
|
CS-3000-XXX-RR-P12
|
||
|
1″ NPS
|
CS-3000-XXX-RR-P16
|
||
|
1 1/4″ NPS
|
CS-3000-XXX-RR-P20
|
||
|
2″ NPS
|
CS-3000-XXX-RR-P32
|
1. XXX denotes fittings configuration (i.e. CPL = Coupling). See Chart in left column for Typical Shapes
2. In addition to the ITK & MTK Tool Kits, a hydraulic pump and hose are required.
See Figure 3 at left which shows the electric, pneumatic, and manually operated pump options and the 15′ hose.