The following page has specific information for the Stainless Steel Tube fittings. General tooling information and information about typical shapes can be found on the tooling reference page.
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1. XXX denotes fittings configuration (i.e. CPL = Coupling). See Chart in left column for Typical Shapes
2. Carbon Steel tools and inserts can be used with Stainless Steel fittings – consult your authorized LOKRING distributor for details and options.
3. In addition to the ITK & MTK Tool Kits, a hydraulic pump and hose are required.
See Figure 3 at left which shows the electric, pneumatic, and manually operated pump options and the 15′ hose.
4. Where Tool Kit Part Number is not indicated, contact your authorized LOKRING distributor for details. Additional individual and multiple Tool Kits are available.
How to Select Tooling
- The shaded cells show which tool can install which size fitting.
- Specify the fitting size and material along with which tool size is desired in order to receive the proper setup for installing Lokring fittings.
| Tool selection for Carbon and Stainless Pipe fitting sizes: | |||||||||||
|
Tool |
1/4 |
3/8 |
1/2 |
5/8 |
3/4 |
7/8 |
1 |
1-1/4 |
1-1/2 |
2 |
2-1/2 |
| IT04 | |||||||||||
| IT10 | |||||||||||
| IT20 | |||||||||||
|
IT45 |
|||||||||||
|
IT50 |
|||||||||||
|
IT60 |
|||||||||||